Tag Archives: wheel hub bearings bearing

China Standard Wheel Hubs with Bearings for Chrysler OE: 5085406AA 5085406ab 5085406AC 5105233AA 5105233ab 5105233AC 5154211AA K05085406AC K05154211AA Bearing Hub with Good quality

Product Description

 

Name: Wheel HUBS with BEARINGS for CHRYSLER OE 5 0571 06AA 5 0571 06AB 5 0571 06AC 51 0571 3AA 51 0571 3AB 51 0571 3AC 5154211AA KAC K5714211AA bearing hub        
Type: wheel bearing
Position: Front/rear axle
Weight: 2.5KG
Specifications: OEM standard size 
Material: Chrome steel/GCR-15
Technology: Hot forging
CAGE: TN Nylon
SEAL: ZZ, 2RS
Rolling body: Steel ball
ABS: Without
Quality: Top grade
Brands: DHXB, OEM
Origin: China
 

DODGE : AA   DODGE : AB   DODGE : AC   DODGE : 5715233AB

DODGE : 5715233AC   DODGE : 5714211AA   DODGE : 5 0571 06AA      DODGE : 5 0571 06AB

DODGE : 5 0571 06AC     DODGE : 51 0571 3AB    DODGE : 51 0571 3AC      DODGE : 5154211AA


Introduction to WHEEL HUB BEARING ASSEMBLY
Our wheel hub bearings assembly are characterised by:

  • optimisation of internal geometry and sealing
  • the use of steel with a very high level of cleanliness
  • the use of greases specifically developed with our suppliers

Our third generation of wheel bearings integrate hub and flange functions for a streamlined and effective assembly and precise adjustment of the pre-load.
We can provide you with robust solutions, whatever your areas of application: passenger vehicles, utilities or heavy goods vehicles.

Related Catalogues You May Concern
 

NTN number KOYO number NSK number OE number
HUB002-6 DACF01 27BWK02 51750-25000
HUB005 DACF09 27BWK03 52710-57100
HUB008 DACF1005C 27BWK04 52710-02XXX
HUB030 DACF1015D 27BWK06 52710-22400
HUB031 DACF1018L 28BWK06 52710-22600
HUB033 DACF1571 28BWK08 52710-25000
HUB036 DACF1033K 28BWK09 52710-25001
HUB042-32 DACF1033K-1 28BWK12 52710-25100
HUB053 DACF1033K-2 28BWK15 52710-25101
HUB059 DACF1034C-3 28BWK16 52710-29400
HUB065-15 DACF1034AR-2 28BWK19 52710-29450
HUB066-52 DACF1041H 30BWK06 52710-29460
HUB066-53 DACF1041JR 30BWK10 52710-29500
HUB081-45 DACF1050B 30BWK11 52710-29XXX
HUB082-6 DACF1065A 30BWK15 52710-29ZZZ
HUB083-64 DACF1072B 30BWK16 52710-34XXX
HUB083-65 DACF1076D 33BWK02 52710-34500
HUB099 DACF1082 36BWK02 52710-34501
HUB132-2 DACF1085 38BWK01 52710-2D000
HUB144 DACF1085-2 41BWK03 52710-2D100
HUB145-7 DACF1085-4-123 43BWK01 52710-3A101
HUB147-20/L DACF1085-5-140 43BWK03 52710-34700
HUB147-22/R DACF1086-2 51KWH01 52730-38002
HUB150-5 DACF1091 54KWH01 52730-38102
HUB156-37 DACF1092 54KWH02 52730-38103
HUB156-39 DACF1097 55BWKH01RHS 52750-1G100
HUB181-22 DACF1091/G3 55BWKH01LHS 45712-EL000
HUB181-32 DACF1092/G3 2DUF58BWK038 43202-EL00A
HUB184 DACF1102A 2DUF50KWH01EJB 42410-06091
HUB184A DACF1172 2DUF053N 42450-52060
HUB188-6 DACF1177 DU5496-5 89544-12571
HUB189-2/R 3DACF026F-7 DU4788-2LFT 89544-57171
HUB189-4/L 3DACF026F-7S 38BWD10 89544-32040
HUB199 3DACF026F-1A 40BWD12 42200-SAA-G51
HUB226 3DACF026F-1AS 40BWD16 43200-9F510
HUB227 DACF35711AC 40BWD17 43200-9F510ABS
HUB230A DACF35711A   43200-WE205
HUB231 DACF7001   89544-48571
HUB254 DACF7002   52008208
HUB280-2 3DACF026-8S   52009867AA
HUB283-6 3DACF030N-1   OK202-26-150
HUB294 DACF2044M   OK9A5-26-150
HUB80-27 DACF2126 PR   BN8B-26-15XD
  DACF805201 BA   13207-01M00
  DAC4278A2RSC53   MR223284
      3C0498621
      46T080705CCZ
      6X0501477
      1T0498621
      1T571611B
      6D20A

ZheJiang Huaxu Bearing Co.,Ltd 
Our factory specialize wheel hub bearing, wheel bearing kit, clutch bearing, taper roller bearing, truck bearing, wheel hub bearing in high quality.
Our bearings have large loading capacity and long lifetime, and widely fit in different vehicles.
wheel bearings and kits to vehicles like LADA, TOYOTA, HONDA, RENAULT, AUDI,Chevrolet, HYUNDAI,FIAT, FORD and so on.
Truck bearings applied to VOLVO, MAN, BENZ, DAF, SAF and so on.
And we can produce bearings which can meet your multifarious demands.
For example, wheel bearing, taper roller bearing, clutch release bearing, ball bearing, truck bearing ect. 
We can provide brands likeTIMKEN, NSK, KOYO, NTN,, NACHI, GMB, BW, GM, HYUNDAI ect.

Q:What’s your after-sales service and warranty?
A: We promise to bear the following responsibilities when defective products were found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.

Q:Do you accept ODM&OEM orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.

Q:What’s the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.

Q:How long is the lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.

Q:Do you offer free samples? 
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users. 

Q:How to place order?
A: 1. Email us the model, brand and quantity,shipping way of bearings and we will quote our best price for you; 
2. Proforma Invoice made and sent to you as the price agreed by both parts; 
3. Deposit Payment after confirming the PI and we arrange production; 
4. Balance paid before shipment or after copy of Bill of Loading.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: After Market Service
Warranty: 50000km
Type: Wheel Hub Bearing
Material: Chrome Steel
Tolerance: P0.P6.P5
Certification: TS16949, IATF16949
Samples:
US$ 0/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

axle hub

Can you recommend reliable brands for purchasing replacement axle hubs?

When it comes to purchasing replacement axle hubs, there are several reliable brands known for their quality and durability. Here are some recommended brands:

  • Timken: Timken is a well-known brand that specializes in manufacturing high-quality bearings and hub assemblies. They have a reputation for producing reliable and long-lasting products. Timken axle hubs are widely used in the automotive industry and are trusted by both professionals and DIY enthusiasts.
  • Moog: Moog is another reputable brand that offers a wide range of suspension and steering components, including axle hubs. Moog axle hubs are known for their precision engineering, excellent build quality, and reliable performance. They are designed to meet or exceed OEM (Original Equipment Manufacturer) specifications and are a popular choice among car owners.
  • ACDelco: ACDelco is a trusted brand that provides a comprehensive range of automotive replacement parts. Their axle hubs are designed to deliver reliable performance and durability. ACDelco axle hubs are often recommended for their compatibility with various vehicle makes and models, making them a reliable choice for replacement.
  • SKF: SKF is a well-established brand with a strong reputation in the automotive industry. They are known for their high-quality bearings and hub assemblies, including axle hubs. SKF axle hubs are engineered to provide excellent performance and longevity. They are often regarded as a premium option for those seeking reliable replacement parts.
  • NTN: NTN is a trusted manufacturer of bearings and hub assemblies. They offer a range of axle hubs that are designed to meet stringent quality standards. NTN axle hubs are known for their durability and precise fitment, making them a reliable choice for replacement in various vehicles.

It’s important to note that the availability of specific brands may vary depending on your location and the make and model of your vehicle. Additionally, it’s always a good idea to consult with a trusted mechanic or do thorough research to ensure the compatibility of the axle hubs with your vehicle before making a purchase.

In summary, some reliable brands for purchasing replacement axle hubs include Timken, Moog, ACDelco, SKF, and NTN. These brands have a solid reputation for producing high-quality and durable axle hubs, making them trusted choices for maintaining and repairing your vehicle’s axle system.

axle hub

Are there specific tools required for DIY axle hub replacement, and where can I find them?

When undertaking a DIY axle hub replacement, certain tools are needed to ensure a smooth and successful process. Here are some specific tools that are commonly required for DIY axle hub replacement and where you can find them:

  • Jack and jack stands: These tools are essential for raising the vehicle off the ground and providing a stable support system. You can find jacks and jack stands at automotive supply stores, hardware stores, and online retailers.
  • Lug wrench or socket set: A lug wrench or a socket set with the appropriate size socket is necessary to loosen and tighten the lug nuts on the wheel. These tools are commonly available at automotive supply stores, hardware stores, and online retailers.
  • Torque wrench: A torque wrench is required to tighten the lug nuts on the wheel and other fasteners to the manufacturer’s recommended torque specifications. Torque wrenches can be found at automotive supply stores, tool stores, and online retailers.
  • Pry bar: A pry bar is useful for gently separating the axle hub assembly from the mounting point, especially if it is tightly secured. Pry bars are available at automotive supply stores, hardware stores, and online retailers.
  • Hammer: A hammer can be used to tap or lightly strike the axle hub assembly or its components for removal or installation. Hammers are commonly available at hardware stores, tool stores, and online retailers.
  • Wheel bearing grease: High-quality wheel bearing grease is necessary for lubricating the axle hub assembly and ensuring smooth operation. Wheel bearing grease can be purchased at automotive supply stores, lubricant suppliers, and online retailers.
  • Additional tools: Depending on the specific vehicle and axle hub assembly, you may require additional tools such as a socket set, wrenches, pliers, or specific specialty tools. Consult the vehicle’s service manual or online resources for the specific tools needed for your vehicle model.

To find these tools, you can visit local automotive supply stores, hardware stores, or tool stores in your area. They typically carry a wide range of automotive tools and equipment. Alternatively, you can explore online retailers that specialize in automotive tools and equipment, where you can conveniently browse and purchase the tools you need.

It’s important to ensure that the tools you acquire are of good quality and suitable for the task at hand. Investing in quality tools can make the DIY axle hub replacement process more efficient and help achieve better results. Additionally, always follow the manufacturer’s instructions and safety guidelines when using tools and equipment.

In summary, specific tools are required for DIY axle hub replacement, such as a jack and jack stands, lug wrench or socket set, torque wrench, pry bar, hammer, and wheel bearing grease. These tools can be found at automotive supply stores, hardware stores, tool stores, and online retailers. Acquiring quality tools and following proper safety guidelines will contribute to a successful DIY axle hub replacement.

axle hub

Are there any recalls or common issues associated with specific axle hub models?

Recalls and common issues can occur with specific axle hub models due to manufacturing defects, design flaws, or other factors. Here’s a detailed explanation:

It’s important to note that specific recalls and common issues can vary depending on the make, model, and year of the vehicle, as well as the specific axle hub manufacturer. Manufacturers and regulatory bodies such as the National Highway Traffic Safety Administration (NHTSA) monitor and address safety concerns related to axle hubs through recalls and investigations.

Recalls are typically initiated by the vehicle manufacturer or the axle hub manufacturer in response to identified safety defects or non-compliance with safety standards. Recalls aim to address the issues and rectify any potential safety risks associated with the axle hub models. They may involve inspections, repairs, or replacements of the affected components.

To determine if there are any recalls or common issues associated with specific axle hub models, it is recommended to check the following sources:

  1. Manufacturer’s Website: Visit the official website of the vehicle manufacturer or the axle hub manufacturer. They often provide information on recalls, technical service bulletins (TSBs), and common issues related to their products. Look for any relevant information specific to the axle hub models in question.
  2. NHTSA Website: The NHTSA maintains a comprehensive database of recalls and investigations related to vehicle components, including axle hubs. Their website allows users to search for recalls and investigations by specific make, model, and component. You can use their search tool to check if there are any recalls or investigations associated with the axle hub models of interest.
  3. Owner Forums and Online Communities: Online forums and communities dedicated to specific vehicle makes and models can be a valuable source of information. Owners often share their experiences, including common issues they have encountered with axle hub models. It’s important to consider multiple sources and exercise caution when relying on anecdotal information.
  4. Service Centers and Mechanics: Local service centers and mechanics who specialize in the specific vehicle make or have experience with the axle hub models in question may be aware of any recalls or common issues. They can provide insights based on their firsthand knowledge and experience.

By consulting these sources, you can gather information about any recalls or common issues associated with specific axle hub models. If any recalls or safety concerns are identified, it is recommended to contact the vehicle manufacturer or a certified dealership to inquire about the necessary actions, such as inspections or repairs, to address the issues.

In summary, recalls and common issues can occur with specific axle hub models. Checking the manufacturer’s website, the NHTSA website, owner forums, and consulting with service centers and mechanics can provide valuable information regarding any recalls or common issues associated with the axle hub models of interest. It’s important to stay informed and take appropriate actions to address any identified safety concerns.

China Standard Wheel Hubs with Bearings for Chrysler OE: 5085406AA 5085406ab 5085406AC 5105233AA 5105233ab 5105233AC 5154211AA K05085406AC K05154211AA Bearing Hub   with Good quality China Standard Wheel Hubs with Bearings for Chrysler OE: 5085406AA 5085406ab 5085406AC 5105233AA 5105233ab 5105233AC 5154211AA K05085406AC K05154211AA Bearing Hub   with Good quality
editor by CX 2024-05-13

China factory Auto Automotive Car Unit Front Axle Wheel Bearing Hub Tapered Thrust Cylindrical Deep Groove Pillow Block Roller Ball Hub Bearings for (43550-26010) with Hot selling

Product Description

Applications
1. machine tools,metallurgical machinery,
2. textile machinery,printing machinery,
3.other machinery,equipment,Can make the mechanical 
4. system design very compact and nimble

 

 

FAQ
Frequently Asked Questions
Q: Are you a trading company or a manufacturer?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.

 

How to Calculate the Diameter of a Worm Gear

worm shaft
In this article, we will discuss the characteristics of the Duplex, Single-throated, and Undercut worm gears and the analysis of worm shaft deflection. Besides that, we will explore how the diameter of a worm gear is calculated. If you have any doubt about the function of a worm gear, you can refer to the table below. Also, keep in mind that a worm gear has several important parameters which determine its working.

Duplex worm gear

A duplex worm gear set is distinguished by its ability to maintain precise angles and high gear ratios. The backlash of the gearing can be readjusted several times. The axial position of the worm shaft can be determined by adjusting screws on the housing cover. This feature allows for low backlash engagement of the worm tooth pitch with the worm gear. This feature is especially beneficial when backlash is a critical factor when selecting gears.
The standard worm gear shaft requires less lubrication than its dual counterpart. Worm gears are difficult to lubricate because they are sliding rather than rotating. They also have fewer moving parts and fewer points of failure. The disadvantage of a worm gear is that you cannot reverse the direction of power due to friction between the worm and the wheel. Because of this, they are best used in machines that operate at low speeds.
Worm wheels have teeth that form a helix. This helix produces axial thrust forces, depending on the hand of the helix and the direction of rotation. To handle these forces, the worms should be mounted securely using dowel pins, step shafts, and dowel pins. To prevent the worm from shifting, the worm wheel axis must be aligned with the center of the worm wheel’s face width.
The backlash of the CZPT duplex worm gear is adjustable. By shifting the worm axially, the section of the worm with the desired tooth thickness is in contact with the wheel. As a result, the backlash is adjustable. Worm gears are an excellent choice for rotary tables, high-precision reversing applications, and ultra-low-backlash gearboxes. Axial shift backlash is a major advantage of duplex worm gears, and this feature translates into a simple and fast assembly process.
When choosing a gear set, the size and lubrication process will be crucial. If you’re not careful, you might end up with a damaged gear or 1 with improper backlash. Luckily, there are some simple ways to maintain the proper tooth contact and backlash of your worm gears, ensuring long-term reliability and performance. As with any gear set, proper lubrication will ensure your worm gears last for years to come.
worm shaft

Single-throated worm gear

Worm gears mesh by sliding and rolling motions, but sliding contact dominates at high reduction ratios. Worm gears’ efficiency is limited by the friction and heat generated during sliding, so lubrication is necessary to maintain optimal efficiency. The worm and gear are usually made of dissimilar metals, such as phosphor-bronze or hardened steel. MC nylon, a synthetic engineering plastic, is often used for the shaft.
Worm gears are highly efficient in transmission of power and are adaptable to various types of machinery and devices. Their low output speed and high torque make them a popular choice for power transmission. A single-throated worm gear is easy to assemble and lock. A double-throated worm gear requires 2 shafts, 1 for each worm gear. Both styles are efficient in high-torque applications.
Worm gears are widely used in power transmission applications because of their low speed and compact design. A numerical model was developed to calculate the quasi-static load sharing between gears and mating surfaces. The influence coefficient method allows fast computing of the deformation of the gear surface and local contact of the mating surfaces. The resultant analysis shows that a single-throated worm gear can reduce the amount of energy required to drive an electric motor.
In addition to the wear caused by friction, a worm wheel can experience additional wear. Because the worm wheel is softer than the worm, most of the wear occurs on the wheel. In fact, the number of teeth on a worm wheel should not match its thread count. A single-throated worm gear shaft can increase the efficiency of a machine by as much as 35%. In addition, it can lower the cost of running.
A worm gear is used when the diametrical pitch of the worm wheel and worm gear are the same. If the diametrical pitch of both gears is the same, the 2 worms will mesh properly. In addition, the worm wheel and worm will be attached to each other with a set screw. This screw is inserted into the hub and then secured with a locknut.

Undercut worm gear

Undercut worm gears have a cylindrical shaft, and their teeth are shaped in an evolution-like pattern. Worms are made of a hardened cemented metal, 16MnCr5. The number of gear teeth is determined by the pressure angle at the zero gearing correction. The teeth are convex in normal and centre-line sections. The diameter of the worm is determined by the worm’s tangential profile, d1. Undercut worm gears are used when the number of teeth in the cylinder is large, and when the shaft is rigid enough to resist excessive load.
The center-line distance of the worm gears is the distance from the worm centre to the outer diameter. This distance affects the worm’s deflection and its safety. Enter a specific value for the bearing distance. Then, the software proposes a range of suitable solutions based on the number of teeth and the module. The table of solutions contains various options, and the selected variant is transferred to the main calculation.
A pressure-angle-angle-compensated worm can be manufactured using single-pointed lathe tools or end mills. The worm’s diameter and depth are influenced by the cutter used. In addition, the diameter of the grinding wheel determines the profile of the worm. If the worm is cut too deep, it will result in undercutting. Despite the undercutting risk, the design of worm gearing is flexible and allows considerable freedom.
The reduction ratio of a worm gear is massive. With only a little effort, the worm gear can significantly reduce speed and torque. In contrast, conventional gear sets need to make multiple reductions to get the same reduction level. Worm gears also have several disadvantages. Worm gears can’t reverse the direction of power because the friction between the worm and the wheel makes this impossible. The worm gear can’t reverse the direction of power, but the worm moves from 1 direction to another.
The process of undercutting is closely related to the profile of the worm. The worm’s profile will vary depending on the worm diameter, lead angle, and grinding wheel diameter. The worm’s profile will change if the generating process has removed material from the tooth base. A small undercut reduces tooth strength and reduces contact. For smaller gears, a minimum of 14-1/2degPA gears should be used.
worm shaft

Analysis of worm shaft deflection

To analyze the worm shaft deflection, we first derived its maximum deflection value. The deflection is calculated using the Euler-Bernoulli method and Timoshenko shear deformation. Then, we calculated the moment of inertia and the area of the transverse section using CAD software. In our analysis, we used the results of the test to compare the resulting parameters with the theoretical ones.
We can use the resulting centre-line distance and worm gear tooth profiles to calculate the required worm deflection. Using these values, we can use the worm gear deflection analysis to ensure the correct bearing size and worm gear teeth. Once we have these values, we can transfer them to the main calculation. Then, we can calculate the worm deflection and its safety. Then, we enter the values into the appropriate tables, and the resulting solutions are automatically transferred into the main calculation. However, we have to keep in mind that the deflection value will not be considered safe if it is larger than the worm gear’s outer diameter.
We use a four-stage process for investigating worm shaft deflection. We first apply the finite element method to compute the deflection and compare the simulation results with the experimentally tested worm shafts. Finally, we perform parameter studies with 15 worm gear toothings without considering the shaft geometry. This step is the first of 4 stages of the investigation. Once we have calculated the deflection, we can use the simulation results to determine the parameters needed to optimize the design.
Using a calculation system to calculate worm shaft deflection, we can determine the efficiency of worm gears. There are several parameters to optimize gearing efficiency, including material and geometry, and lubricant. In addition, we can reduce the bearing losses, which are caused by bearing failures. We can also identify the supporting method for the worm shafts in the options menu. The theoretical section provides further information.

China factory Auto Automotive Car Unit Front Axle Wheel Bearing Hub Tapered Thrust Cylindrical Deep Groove Pillow Block Roller Ball Hub Bearings for (43550-26010)   with Hot sellingChina factory Auto Automotive Car Unit Front Axle Wheel Bearing Hub Tapered Thrust Cylindrical Deep Groove Pillow Block Roller Ball Hub Bearings for (43550-26010)   with Hot selling

China supplier CZPT Dac256200206 Zz Car Wheel Bearings Rear Axle Auto Hub Bearing with Hot selling

Product Description

Product Description

KOYO DAC25625716 ZZ Car Wheel Bearings Rear Axle Auto Hub Bearing 
Bearings used in automobile, including wheel hub bearing, gearbox bearing, air conditioning compressor bearing, separation bearing, etc 

The main function of hub bearing is to bear load and provide accurate guidance for the rotation of hub. It bears both axial load and radial load, so it is a very important part. The traditional bearings for automobile wheels are composed of 2 sets of tapered roller bearings or ball bearings. The installation, oiling, sealing and clearance adjustment of bearings are carried out on the automobile production line. This kind of structure makes it difficult to assemble, high cost and poor reliability in the automobile factory, and when the automobile is in the maintenance point, it also needs to clean, oil and adjust the bearing. Hub bearing unit is developed on the basis of standard angular contact ball bearing and tapered roller bearing. It integrates 2 sets of bearings. It has the advantages of good assembly performance, omitting clearance adjustment, light weight, compact structure, large load capacity, pre loading grease for sealed bearings, omitting external hub sealing and avoiding maintenance. It has been widely used in cars, There is also a trend to gradually expand the application in trucks.

Product nameWheel Wheel Hub Bearing
Material Bearing Steel
Standard DIN GB ISO JIS
Bearing Package Barreled, bagged, boxed, palletized or as customers’ requirement.
Service OEM service provided
Delivery time 3-10 days depends on quantity needed

Detailed Photos

 

 

Product Parameters

  BDL.NO       Automotive
type
  SKF   KOYO NTN SNR NSK BCA IRB OEM
1 DAC124 DAC3568A2RS   GB10840 S02   B-33 IR-8026   Fiat Volvo
76 633,967,633,967       LaDa  Chrysrle
77 DAC3568 M8-808442 DAC4074CWCS73 AU0803   40BWD016       Proton
136 DAC4074   Chrysler    Peugeot
202 DAC45800045 2RS 0.80   564725AB         510051   700-498-630-  
203 DAC45800048 ZZ 0.83         GB 40096          
204 DAC45830044 2RS 0.88 615645                  
205 DAC45840039 2RS 0.88 BAHB 35717 547103E     GB12398S02 45BWD03 513130 IR-8529 2571810127  
206 DAC45840039 ZZ 0.88         GB40264          
207 DAC45840041/39 2RS 0.89     DAC4584DW     43BWD113       Citroen  Peugeot  Volvo
208 DAC45840041/39 ZZ 0.89             510034      
209 DAC45840042/40 ZZ 0.90       DE571   45BWD07B 510039     Mitsubish,2.3
210 DAC4585571 0.70 4209ATN9 4209BTVH           IR-8566    
211 DAC458500302 2RS 0.86     DAC2004              
212 DAC45850041 ZZ 0.88   580191             33411090505 Ford
213 DAC45850051 ZZ 0.88     DAC4585              
214 DAC45880039 0.95         GB40300 S03          
215 DAC47810053 ZZ 0.88     DAC4781WSH2       51571      
216 DAC47850045 ZZ 0.90   K559431         516008      
217 DAC48860042/40             48BWD01        
218 DAC49840048 2RS 0.98 BAHB35717C 547103 DAC458439BW         IR-8572    
219 DAC49840048 ZZ 0.98                    
220 DAC49880046 ZZ 0.92   572506     GB45719S02 49BWD01B       Toyota  Lexus
  BDL.NO       Automotive type
Kg SKF   KOYO NTN SNR NSK BCA IRB OEM
221 DAC50900034 0.84 633007C 528514                
222 DAC55900040                      
223 DAC50820033/28 ZZ 0.78                    
224 DAC55900060                      
225 DAC35720033  ABS 0.56 BAH00583ADX                  
226 DAC37720033  ABS 0.56 BAH0072                  
227 DAC37720037 ABS 0.58 BAH0055                  
228 DAC38730040 ABS 0.65           38BWD26        
229 DAC38740040 ABS             38BWD27        
230 DAC39720037 ABS 0.58 BAH5716                  
231 DAC39740039 ABS 0.66 BAH 0043 C                  
232 DAC4571037 ABS 0.62 BAH 0068 D                  
233 DAC4571039 ABS 0.67           40BWD17        
234 DAC40840040 ABS 0.90         XGB40492          
235 DAC42780045 ABS 0.90 BAH0069                  
236 DAC42820036 ABS 0.78 BAH0178                  
237 DAC43800040 ABS 0.88                    
238 DAC43780044 ABS 0.85     DAC4378W-1 AU571-4     510089      
239 DAC45870041/39 ABS 0.98                    

Packaging & Shipping

 

Company Profile

 

Our Advantages

Our Advantages:
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. 
SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS standard bearings. 
2. MOQ: 1000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.

FAQ

 

1.What is the minimum order quantity for this product?
    Can be negotiated, we will try our best to meet customer needs.Our company is mainly based on wholesale sales, most customers’orders are more than 1 ton.
2.What is your latest delivery time?
    Most orders will be shipped within 7-15 days of payment being received.
3.Does your company have quality assurance?
    Yes, for 1 years.
4.What is the competitiveness of your company’s products compared to other companies?
    High precision, high speed, low noise.
5.What are the advantages of your company’s services compared to other companies?
    Answer questions online 24 hours a day, reply in a timely manner, and provide various documents required by customers for customs clearance or sales. 100% after-sales service.
6.Which payment method does your company support?
    Do our best to meet customer needs, negotiable.
7.How to contact us quickly?
    Please send us an inquiry or message and leave your other contact information, such as phone number, account or account, we will contact you as soon as possible and provide the detailed information you need.

Please feel free to contact us, if you have any other question

 

 

What is a drive shaft?

If you notice a clicking noise while driving, it is most likely the driveshaft. An experienced auto mechanic will be able to tell you if the noise is coming from both sides or from 1 side. If it only happens on 1 side, you should check it. If you notice noise on both sides, you should contact a mechanic. In either case, a replacement driveshaft should be easy to find.
air-compressor

The drive shaft is a mechanical part

A driveshaft is a mechanical device that transmits rotation and torque from the engine to the wheels of the vehicle. This component is essential to the operation of any driveline, as the mechanical power from the engine is transmitted to the PTO (power take-off) shaft, which hydraulically transmits that power to connected equipment. Different drive shafts contain different combinations of joints to compensate for changes in shaft length and angle. Some types of drive shafts include connecting shafts, internal constant velocity joints, and external fixed joints. They also contain anti-lock system rings and torsional dampers to prevent overloading the axle or causing the wheels to lock.
Although driveshafts are relatively light, they need to handle a lot of torque. Torque applied to the drive shaft produces torsional and shear stresses. Because they have to withstand torque, these shafts are designed to be lightweight and have little inertia or weight. Therefore, they usually have a joint, coupling or rod between the 2 parts. Components can also be bent to accommodate changes in the distance between them.
The drive shaft can be made from a variety of materials. The most common material for these components is steel, although alloy steels are often used for high-strength applications. Alloy steel, chromium or vanadium are other materials that can be used. The type of material used depends on the application and size of the component. In many cases, metal driveshafts are the most durable and cheapest option. Plastic shafts are used for light duty applications and have different torque levels than metal shafts.

It transfers power from the engine to the wheels

A car’s powertrain consists of an electric motor, transmission, and differential. Each section performs a specific job. In a rear-wheel drive vehicle, the power generated by the engine is transmitted to the rear tires. This arrangement improves braking and handling. The differential controls how much power each wheel receives. The torque of the engine is transferred to the wheels according to its speed.
The transmission transfers power from the engine to the wheels. It is also called “transgender”. Its job is to ensure power is delivered to the wheels. Electric cars cannot drive themselves and require a gearbox to drive forward. It also controls how much power reaches the wheels at any given moment. The transmission is the last part of the power transmission chain. Despite its many names, the transmission is the most complex component of a car’s powertrain.
The driveshaft is a long steel tube that transmits mechanical power from the transmission to the wheels. Cardan joints connect to the drive shaft and provide flexible pivot points. The differential assembly is mounted on the drive shaft, allowing the wheels to turn at different speeds. The differential allows the wheels to turn at different speeds and is very important when cornering. Axles are also important to the performance of the car.

It has a rubber boot that protects it from dust and moisture

To keep this boot in good condition, you should clean it with cold water and a rag. Never place it in the dryer or in direct sunlight. Heat can deteriorate the rubber and cause it to shrink or crack. To prolong the life of your rubber boots, apply rubber conditioner to them regularly. Indigenous peoples in the Amazon region collect latex sap from the bark of rubber trees. Then they put their feet on the fire to solidify the sap.
air-compressor

it has a U-shaped connector

The drive shaft has a U-joint that transfers rotational energy from the engine to the axle. Defective gimbal joints can cause vibrations when the vehicle is in motion. This vibration is often mistaken for a wheel balance problem. Wheel balance problems can cause the vehicle to vibrate while driving, while a U-joint failure can cause the vehicle to vibrate when decelerating and accelerating, and stop when the vehicle is stopped.
The drive shaft is connected to the transmission and differential using a U-joint. It allows for small changes in position between the 2 components. This prevents the differential and transmission from remaining perfectly aligned. The U-joint also allows the drive shaft to be connected unconstrained, allowing the vehicle to move. Its main purpose is to transmit electricity. Of all types of elastic couplings, U-joints are the oldest.
Your vehicle’s U-joints should be inspected at least twice a year, and the joints should be greased. When checking the U-joint, you should hear a dull sound when changing gears. A clicking sound indicates insufficient grease in the bearing. If you hear or feel vibrations when shifting gears, you may need to service the bearings to prolong their life.

it has a slide-in tube

The telescopic design is a modern alternative to traditional driveshaft designs. This innovative design is based on an unconventional design philosophy that combines advances in material science and manufacturing processes. Therefore, they are more efficient and lighter than conventional designs. Slide-in tubes are a simple and efficient design solution for any vehicle application. Here are some of its benefits. Read on to learn why this type of shaft is ideal for many applications.
The telescopic drive shaft is an important part of the traditional automobile transmission system. These driveshafts allow linear motion of the 2 components, transmitting torque and rotation throughout the vehicle’s driveline. They also absorb energy if the vehicle collides. Often referred to as foldable driveshafts, their popularity is directly dependent on the evolution of the automotive industry.
air-compressor

It uses a bearing press to replace worn or damaged U-joints

A bearing press is a device that uses a rotary press mechanism to install or remove worn or damaged U-joints from a drive shaft. With this tool, you can replace worn or damaged U-joints in your car with relative ease. The first step involves placing the drive shaft in the vise. Then, use the 11/16″ socket to press the other cup in far enough to install the clips. If the cups don’t fit, you can use a bearing press to remove them and repeat the process. After removing the U-joint, use a grease nipple Make sure the new grease nipple is installed correctly.
Worn or damaged U-joints are a major source of driveshaft failure. If 1 of them were damaged or damaged, the entire driveshaft could dislocate and the car would lose power. Unless you have a professional mechanic doing the repairs, you will have to replace the entire driveshaft. Fortunately, there are many ways to do this yourself.
If any of these warning signs appear on your vehicle, you should consider replacing the damaged or worn U-joint. Common symptoms of damaged U-joints include rattling or periodic squeaking when moving, rattling when shifting, wobbling when turning, or rusted oil seals. If you notice any of these symptoms, take your vehicle to a qualified mechanic for a full inspection. Neglecting to replace a worn or damaged u-joint on the driveshaft can result in expensive and dangerous repairs and can cause significant damage to your vehicle.

China supplier CZPT Dac256200206 Zz Car Wheel Bearings Rear Axle Auto Hub Bearing   with Hot sellingChina supplier CZPT Dac256200206 Zz Car Wheel Bearings Rear Axle Auto Hub Bearing   with Hot selling